What’s Included

• Kaneiko Handpiece in pacakging box
• Manual guide book
• Maintenance Cleaning Kit (Nozzle + Needle)
• Head Cap Spanner

Characteristics

• 1:5 speed-increasing gear transmission
• Maximum micromotor input speed of 33,000 rpm
• Nominal maximum bur speed of approximately 165,000 rpm
• Compatible with FG friction-grip burs
• Ø 1.6 mm bur shank compatibility
• Fibre-optic light transmission
• Ceramic bearings for stable rotation
• Push-button chuck system
• Internal or external water spray options
• Clean head system
• Anti-heat system
• Compatible with electric micromotors

Important Speed Limit

Technical Specifications

Model Comparison

Model EB1L with Internal Water Spray

Model EB1L features a Black Nano Titanium body and three-point internal water spray. Water is delivered through the contra-angle handpiece and distributed around the FG bur from three points, supporting cooling, debris removal and visibility during tooth preparation. Designed for chairside and general use, its integrated water channel provides a clean clinical setup without requiring an external spray pipe.

Model E1L-X with External Water Spray

Model E1L-X features a stainless steel body and single-point external water spray. The external spray pipe directs cooling water toward the FG bur and preparation surface. This version is designed for compatible motor and MOS use where an external water delivery configuration is required.

1:5 Speed-Increasing Transmission

The 1:5 gear transmission multiplies the speed produced by the connected electric micromotor by five. For example, a micromotor input speed of 30,000 rpm produces a nominal bur speed of approximately 150,000 rpm. The micromotor input speed must not exceed 33,000 rpm, which produces a nominal maximum bur speed of approximately 165,000 rpm.

Internal and External Water Spray Options

Model EB1L uses a three-point internal water spray that distributes cooling water around the bur through channels inside the handpiece. Model E1L-X uses a single-point external spray pipe that directs water toward the bur and treatment surface. Select the model that matches the water delivery configuration of the intended electric micromotor system.

FG Bur Compatibility

Both Model EB1L and Model E1L-X accept FG friction-grip dental burs with a standard Ø 1.6 mm shank. This allows the handpieces to be used with compatible diamond and carbide FG burs for crown preparation, cavity preparation, restorative adjustment and finishing procedures.

Fibre-Optic Light Transmission

Fibre-optic light transmission carries illumination from a compatible electric micromotor toward the treatment area. Improved visibility supports accurate bur positioning, preparation margin control and restorative procedures in posterior or restricted areas.

Ceramic Bearing

The ceramic bearing supports smooth and stable rotation at increased operating speeds. This helps reduce vibration and supports controlled handling during crown preparation, cavity preparation and restorative finishing procedures.

Push-Button Chuck System

The push-button chuck system supports convenient FG bur insertion and removal without requiring a separate bur-changing tool. Always confirm that the bur is fully inserted and securely retained before operating the handpiece.

Clean Head and Anti-Heat Systems

The clean head system helps reduce the entry of treatment debris into the handpiece head, while the anti-heat system supports controlled temperature management during operation. Correct cleaning, lubrication and sterilisation should be performed according to the recommended maintenance instructions.

Electric Micromotor Compatibility

This 1:5 speed-increasing contra-angle handpiece is designed for use with a compatible electric micromotor. The selected micromotor should support the required connection, fibre-optic light transmission and water delivery configuration of Model EB1L or Model E1L-X. The micromotor speed setting must not exceed 33,000 rpm.

Bur Compatibility

• FG friction-grip dental burs
• Standard bur shank diameter: Ø 1.6 mm
• Use burs approved for the selected output speed
• Confirm that the bur is fully inserted and securely retained before operation
• Select the appropriate bur shape, grit and material for the intended procedure

Recommended Applications by Model

Recommended Clinical Procedures

• Crown and bridge preparation
• Cavity preparation
• Controlled caries removal
• Composite and restorative material removal
• Veneer preparation
• Inlay and onlay preparation
• Restoration contouring and adjustment
• Preparation margin refinement
• Routine restorative and prosthodontic procedures